HOW IT WORKS
USB Charging
Charging phones, power banks and other USB-powered devices
from the Nomad 20 is as easy as plugging in.
1. Open your Nomad 20 and unfold the panels.
2. Use the built-in kickstand to position the panel toward the
sun.
3. Plug your phone or device into the USB port located on the
back side of the panel and charge up.
COLLECT
Gather the sun's energy
with the solar panel.
8mm Charging
Charge a Sherpa Power Bank or small Goal Zero Yeti Power
Station from the sun using the integrated 8mm solar charging
cable.
1. Open your Nomad 20 and unfold the panels.
2. Plug the 8mm cable into the 8mm port located on your power
bank or power station and charge up.
NOTE
A Goal Zero Flip power bank (sold separately) will fit securely
into the Flip charging dock to collect and store power while on
the move.
4
STORE
POWER
Plug a Goal Zero Power Bank
Charge gear
or phone into the panel.
anywhere.
AUTO RESTART
In low light conditions (i.e. lack of sunlight, shadow, dusk,
etc.), some devices, including smartphones, will automatically
stop charging from a solar panel due to a low current input.
The Nomad 20 features auto restart technology that knows
the difference between a device that has reached a fully
charged state and one that disconnects due to environmental
causes. When the latter is detected, the Nomad 20 will
automatically resume charging to start charging the device
again. No extra work on your part is needed.
PRO TIP
When operating in low light conditions, we recommend
pairing your solar panel with a portable power bank for the
best charging experience possible. A Goal Zero Flip power
bank (sold separately) will fit securely into the Nomad 20's
integrated Flip charging dock and allow you to collect and
store a continuous stream of power to charge your device.
WHAT IT POWERS
Sherpa 100PD
Sherpa 100AC
Phone
+ Other
USB Devices
Goal Zero
Yeti 200X Lithium
5