Página 1
SF1, SH1 Product Manual Product Manual Produkthandbuch Manual del producto Produktmanual Manuel du produit Manuale del prodotto Producthandleiding Produkthandbok 1235741-W2-D...
Página 3
Types of Installation / Types d’installation / Installationsarten / Tipos de instalaciones / / Installasjonstyper / Installationstyper / Solid Wall Stud Partition Wall IPS Panel System Brick or block construction with a Wood and plasterboard construction Modular panel system that creates a Mur en dur Cloison de séparation Système de panneau IPS...
Página 7
36 mm - 45 mm 197 mm 36.0 - 45.0 mm 197 mm 15º 15° 118 mm 17 mm 17 mm 15º 15° 110 mm 200 mm Max. 200 mm 15º 15° 118 mm 17 mm 17 mm 15º 15° 110 mm 1235741-W2-D...
Página 8
234 mm Max. 40 mm 77 mm 64.5 mm 53 mm 36.5 mm 1235741-W2-D...
Página 9
GENERAL GENERAL Make sure that the item is installed by a competent Make sure that the item is installed by a competent installer. installer. including the Plumbing Code of Australia (PCA) and AS/NZS 3500. WELS Regulations and for pressures in excess of 300 kPa.
GENERELT installatør. Couper l’alimentation d’eau principale. Respecter tous les codes de plomberie et de og byggeri. SPECIFIKATION P r e s s i o n m i n i m a l e 0.2 bar (20 kPa) Minimum tryckfall maintenue Maximum tryckfall P r e s s i o n m a x i m a l e 3.0 bar (300 kPa)
Página 11
ALGEMEEN ALLMÄNT installateur wordt geïnstalleerd. Sluit de hoofdwaterleiding af. loodgieters- en bouwwerk in acht. SPECIFICATIE SPECIFIKATION Minimale constante druk Minimum tryckfall Maximale constante druk Maximum tryckfall 60°C Rekommenderad maximal 60°C temperatuur temperatur GENERELT GENEL installatør. olun. uyun. Opprettholdt minstetrykk Opprettholdt maksimaltrykk Maksimum anbefalt 60°C 60°C...
Página 12
7.0 mm 2.0 mm 3.0 mm 32 - 36 mm 1235741-W2-D...