LEGRAND 697 40 Manual De Instrucciones

Plexo
360° Waterproof movement detector
697 40/80
Principle
This device is used to automatically
control a light source when a movement
occurs within its surveillance zone.
Permissible power
25°C
230V±
50 Hz
2000 W 2000 W
➀
Incandescent lamps
➁
230 V halogen lamps
➂
Ø 26 mm fluorescent tubes
Detection zone
Technical characteristics
• Power supply : 230 V
• Output via N/O contact connected to the live
• Lighting duration can be adjusted from 12 s to 16 min after the last movement detected
• Movement detection depending on lighting level, threshold can be adjusted
from 10 to 4000 lux
• Sensitivity adjustment : allows to determine the precision of sensor action
• Operating temperature : 0°C to + 55°C (sensor has low sensitivity working
at ambient temperature above 35°C)
• Storage : – 30°C to + 80°C
• Terminal capacity : 2 x 1.5 mm
• Dimensions : 90 X 91 mm - Diameter 91 mm
• Min. installation height : 1.70 m
Ø 26 mm
1000 VA 1000 VA
➃
Compact fluorescent lamps with separate electronic ballast
➄
Compact fluorescent lamps with integrated electronic ballast
8 m
A
- 50/60 Hz
2 or 1 x 2.5 mm
+ +
1000 VA 2000 VA 2000 VA
➅
➆
15°
45°
45°
5
2
Halogen lamps with ferromagnetic transformer
Halogen lamps with electronic transformer
12 m