Bimar HFP10 Folleto De Instrucciones página 19

• Never use the radiator to dry damp garments.
• Do not expose the heater to the weather (sun, rain, etc.).
• Do not pull on the power cord or the appliance to unplug the
appliance from the wall socket. Never move the appliance by
pulling the cord.
• If the electric cord is damaged, it has to be replaced by the supplier
or an authorized service center or a professionally qualified, to
avoid any risks.
• The appliance must not be positioned immediately under a
socket.
• Do not use the appliance with a timer or a programmer or with a
system that can switch on the appliance automatically, to avoid
risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly. Check that no other high absorption
appliances are connected to the same power source.
• Do not use this heater the immediate surroundings of a bath, a
shower or a swimming pool.
• The heater must not be located immediately below a socket-oulet.
• If the suppy cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in
order to avoid hazard.
INSTALLATION
• After removing the packaging very carefully (be very careful when removing the glass),
check the integrity of the heater; if you are unsure, do not use it and ask for qualified
professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be
kept out the reach of children because they are potential sources of danger. If the glass is
protected with adhesive film, this must be removed. All packaging elements must be
19/64