Panasonic CZ-64ESMC3 Manual Del Usuario página 26

Central Address Setting
When setting the central address from the wired remote
control
After the setting is complete, turn on the system controller again.
Setting from wired remote controllers (CZ-RTC4)
Make the setting while stopped.
1
Press and hold the 2 buttons for
several simultaneously.
2
Select the Code no.
3
Select the Set data.
The indicator illuminates after blinking.
Press
Setting from wired remote controllers (CZ-RTC3, CZ-RTC5)
1
Press and hold the 3 buttons for
4 seconds or more simultaneously.
, , ►
2
Select [Simple settings]
▲ ▼ →
3
Set
Do not change the Unit No. from the
initial setting.
Select the item code 03.
Change the setting data, and set the
central address.
Press
position to fi nish the setting.
26
(EN)
→
.
at the Unit No. selection
(continued)
2
A
3
1