Publicidad
II) ENCODING 1 DISC
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO DOOR
2.
PRESS THE " RECORD " BUTTON (9) AFTER FOCUS SEARCH COMPLETED. UNIT
WILL DISPLAY "
3.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
III) ENCODING BY PROGRAM
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO DOOR
2.
SELECT THE DESIRE TRACKS BY FOLLOWING " CD DISC PROGRAMMING
" PROCEDURES. THEN PRESS " CD PLAY/PAUSE/STOP " BUTTON (2) TO START
PLAYBACK.
3.
DUYING CD PLAYBACK, PRESS AND HOLD THE THE " CD PLAY/PAUSE/STOP
" BUTTON (2) FOR 2 SECONDS TO ENTER THE STOP MODE.
4.
PRESS THE " RECORD " BUTTON (9) AND THE UNIT WILL DISPLAY "
" & FLASHING. ENCODING IS PERFORMING NOW.
5.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF
THE CD TRACK
-
THE SYSTEM WILL CREAT A " AUDIO " FOLDER AND THEN STORE THE ENCODING
TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS, SAMPLING
RATE : 44.1KHZ
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING
RECORD MODE.
-
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF
TERMINATE THE ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK
BEING RECORDED NOR STORED TO THE USB OR SD/MMC CARD
IV) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE
FILES TO THE USB OR SD/MMC CARD IF PRESS THE " RECORD " BUTTON (9). THE
OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE, AND
THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3/WMA FILE BEING READ.
REMARK:
-
THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD
SLOT ARE BEING OCCUPLIED BY STORAGE MEDIA.
-
IF PRESS THE " RECORD " BUTTON DURING PLAYBACK OF USB OR SD SOURCE,
THE FILE WILL COPY FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO " PHONO " MODE AND THEN PRESS THE " RECORD
" BUTTON (9) DIRECTLY.
THE LCD DISPLAY WITH SHOW THE WORD " USB " AND THEN FLASHING, AND THEN
2)
DISPLAY "
SYSTEM IS STARTING THE ENCODING MODE.
3)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO
USB.
4)
AFTER FINISH OF RECODING, PRESS AND HOLD THE " RECORD " BUTTON (9) UNTIL
THE LCD STOP FLASHING AND RETURN TO " PHONO " MODE.
" & "
" AND FLASHING. ENCODING IS PERFORMING NOW.
" & "
" AND FLASHING AFTER FEW SECONDS. NOW THE
" & "
Publicidad
