Mhouse MATS1 Instrucciones Para El Uso página 9

3.2.4 - Sending a command with the touchscreen
After creating and memorising all required commands, the
automation can be controlled as follows:
01. Turn on the touchscreen and touch the icon
mands) on the main screen;
02. Touch the icon of one of the 3 types of automation as
associated with the automation to be controlled;
03. Scroll through the list to locate the required command
and press and hold to activate radio transmission (the
blue led flashes to indicate transmission in progress).
A command can also be sent directly using the immediate
keys (fig. 1) only if the latter have been programmed in
advance (see paragraph 3.2.3).
3.2.5 - Disabling a memorised command
Warning – The procedures described below do not delete a
command memorised on the automation; they simply disable
transmission. To definitively delete the command, refer to the
instruction manual of the automation receiver.
To disable a command:
01. Turn on the touchscreen and touch the icon
mands) on the main screen;
02. Scroll through the icons on the right by touching the sym-
bol ;
03. Touch (Set) and then "Commands";
04. In the list displayed, touch the command to be disabled;
05. On the next screen, touch "Type" and the item "----");
then press; then press "OK" to confirm;
06. Press "OK" to confirm.
To disable a command associated with an immediate
key:
(Com-
01. Turn on the touchscreen and touch the icon
mands) on the main screen;
02. Scroll through the icons on the right by touching the sym-
bol ;
03. Touch (Set) and then "Immediate keys";
04. On the list displayed, touch the required key and then "----";
press "OK" to confirm;
05. Repeat point 04 for each key to be disabled and then
press "OK" to confirm.
3.3 - Using the touchscreen as an interface for
the Mhouse alarm system
To use the touchscreen as an interface for programming and
controlling the Mhouse alarm system, refer to the alarm sys-
tem instruction manual.
3.4 - Using the touchscreen as a voicemail appli-
cation
(Com-
The touchscreen has a voicemail application with which the
user can record and listen to messages. The user can access
this function directly via the main screen by pressing the icon
(Messages).
To record a new message:
01. Turn on the touchscreen and touch the icon "Messages"
and then "New" on the main screen;
EN
(Com-
English - 7