Steelcase Sync Manual De Instrucciones página 4

®
HEALTH
5.
Locate door clip (or both) that needs to be replaced.
Remove two (2) screws (5a). Remove damaged door clip.
Install replacement door clip by inserting two (2) screws
through the door clip and into the holes (5b).
6.
If the door clip pin(s) need to be replaced, simply
remove from the tile and insert replacement door clip pin.
7.
Close the tile and check for a secure fit. If there is any
rattle in the tile fit, open the tile and tighten the door clip
pin by 1/2 turn. Close tile and check for fit again. Repeat
as necessary. If the door clip pin does not engage the
clip, open the tile and loosen the pin by 1/2 turn. Close
tile and check for fit again. Repeat as necessary.
8.
Reverse steps 1 thru 4.
5a
DOOR CLIP
SCREW
HOLES
5b
DOOR
CLIP PIN
6
Page 4 of 12
939500401 Rev C