Know Your Pressure Washer - SpeedClean 2200 PSI Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Adjustable Nozzle Extension
Air Filter
Throttle Control Lever
Primer Bulb
Adjustable Nozzle Extension — Adjustable nozzle
allows you to adjust spray pressure and spray pattern.
Air Filter — Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F.Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Cleaning Tank — Use to hold up to one gallon of
pressure washer detergent.
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
SpeedClean™ 2200 PSI Pressure Washer
Spray Gun
Cleaning Tank
Recoil Starter
Pump equipped with Automatic
Cool Down System
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Oil Fill/Dipstick — Check and fill with oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Control Lever — Sets engine in starting mode
for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
6
High Pressure Hose
Oil Fill/Dipstick
High Pressure Outlet
& Water Inlet

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

020261-0

Tabla de contenido