McCulloch B428 PS Manual De Instrucciones página 9

OIL SPECIFICATIONS
Use only high quality detergent oil with service
Select the oil's SAE viscosity grade according to
your expected operating temperature. For most
special additives.
NOTE: Synthetic oil meeting or exceeding the
at all temperatures. Use of synthetic oil does not
alter required oil change intervals.
CAUTION: Air cooled engines run hotter than
automotive engines. The use of non-synthetic
multi-viscosity oils such as 5W30 and 10W30
in temperatures above 4°C will result in higher
than normal oil consumption. When using
a multi-viscosity oil, check oil level more
frequently to avoid possible engine damage
from running low on oil.
ADDING OIL
Your machine is shipped without oil in the engine.
The engine holds approximately 75 mL of oil when at
the "MAX FILL" indicator line on the oil tank window.
Included with this machine is a 75 mL container of oil
only. Pour the entire contents of this container of oil
as needed.
engine damage may occur.
CAUTION: The engine must be level, with the
Check the oil level before starting the engine.
Check the oil level before every use.
Keep the oil level at the "MAX FILL" indicator line.
1. Be sure the engine is level and the area around
2.
3.
OPERATION
4. Verify the "MAX FILL" level of oil by checking the
indicator lines on the oil tank window.
5. Before starting the engine, always be sure to
Check the oil level before each use. Add oil if needed.
Fill to "MAX FILL" indicator line on the oil tank window.
25 hours of operation or each season. Change the
oil every 10 hours when operating the engine under
heavy load or in high temperatures. You may need to
change the oil more often under dusty, dirty conditions.
ADD PETROL
This machine is designed to operate on unleaded
not mix oil with petrol. Purchase fuel in quantities that
can be used within 30 days to assure fuel freshness.
CAUTION: DO NOT use alternate fuels such as
ethanol blends above 10% by volume (E-15 -
E-85) or any methanol blended fuel. Use of these
fuels can cause major engine performance and
durability problems.
1. Turn the fuel cap counterclockwise to remove it.
2.
neck.
3.
4. Turn the fuel cap clockwise to tighten it.
HOW TO STOP YOUR MACHINE
1.
2. Move the ON/STOP switch to the STOP position.