Publicidad
Idiomas disponibles
Idiomas disponibles
Bus Transformer 199099
Applications
The Bus Transformer is designed for use with Oras Electra
products No. 6661FT, 6662FT, 6664FT and 6220FT.
Technical data
Protection class
Electrical connection:
Max. total length of cabling between
bus transformer and the devices:
Number of devices connected:
Connection cable
Installation
– The cable must be 4 x 0.25 mm² in order to utilize the
intelligent switch- off feature and centralized Data Terminal
adjustments that are enabled by Oras bus transformer no.
199099.
– The mains and communication cables must always be kept
separated with double insulation; use the enclosed protective
insulator sleeve to ensure double insulation, if necessary. The
communication cables sheath must be entered above the
upper circuit board.
– The green light shows when the power is on. Faucets and
flushers can be switched off for cleaning and maintenance
operations by pressing the ON/OFF key of the transformer.
All devices will be switched on consecutively, if the
transformer's ON/OFF key is pressed for more than 3 seconds.
NOTE! Electrical installations must be carried out by a qualified
electrician.
IP 20
230 VAC / 7 W
50 m
max. 15
4 x 0.25 mm²
3
GB
Publicidad
