The laminated document is
automatically driven out at the
output tray
8. Remove the laminated document
and leave it on a flat surface for
one minute to cool down.
9. If you do not wish to laminate
further documents, switch off the
laminator.
How to use the Smart Guide System
(Turbo models only)
1. Open the guides
2. Pull out the supports
3. Open the pouch and place it on the
input tray
4. Close the guides
document on top of the lower
pouch sheet and supports
5. Close the pouch. Feed the pouch
into the laminator
Notice: If possible avoid the use of
the reverse button
the Smart Guide System. However,
should use of the reverse button
be essential, ensure you hold
the pouch away from the feed
sensor once it has exited, and
carefully remove from the Smart
Guide System.
Troubleshooting
How to retrieve a pouch that has not been inserted correctly
1. Press and hold the reverse button
input tray.
2. Assist the reverse motion by carefully pulling at the pouch. The reverse
motion ends once a full A3 length has been ejected. Then the machines
returns to forward feed mode.
.
4
.
.
.
. Add the
.
when using
Maintenance and care
How to clean the rollers
• In order to remove superfluous
adhesive from inside the device,
clean the rollers regularly.
1. Set the rear switch
position to turn on the laminator.
The On/Off button
blue and you will hear a beep.
2. Press the On/Off button
The On/Off button
flashing blue. The laminator heats
up. As soon as the On/Off button
lights steadily blue again
and you hear beep, the working
temperature has been reached.
3. Fold a sheet of unused copying
paper once in the middle.
4. Insert the paper with the folded
.
side first into the input tray 3–5
times. Alternatively insert a
purpose designed cleaning card
into the machine.
How to clean the housing
1. Pull out mains plug
for the device to cool down.
2. Wipe the exterior with a soft, damp
cloth and a dishwashing detergent.
Do not use cleaning tissues or
chemical substances which might
damage the surface.
. The pouch is driven out again at the
3
5
in the "I"
will light
.
will start
and wait
6