Publicidad
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
Residual risk! People with electronic
devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of
electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the
pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500/HTX7500
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Indicates a potential personal
Safety Alert
injury hazard.
Read
To reduce the risk of injury,
Operator's
user must read the operator's
Manual
manual.
Do Not Expose
Do not use in the rain or leave
To Rain
outdoors while it is raining.
Never attempt to operate your
power tool with one hand.
Loss of control of the power
Keep hands
tool resulting in serious or fatal
and feet away
injury may result. To reduce the
from the
risk of cut injuries, keep hands
cutting tool
and feet away from the cutting
tool. Never attach a moving
cutting tool with your hand or
any other part of your body.
Always wear safety goggles
Wear Eye
or safety glasses with side
Protection
shields and a full face shield
when operating this product
Guaranteed sound power
level. Noise emission to the
XX
Noise
environment according to
the European community's
Directive.
This product is in accordance
CE
with applicable EC directives.
Waste electrical products
should not be disposed of with
WEEE
household waste. Take to an
authorized recycler.
Blade Length
The length of the blade
XXcm
Cutting
Max. Cutting capacity of the
Ø33 mm
Capacity
blade
V
Volt
Voltage
Type or a characteristic of
Direct Current
current
EN
5
Publicidad
