Automatic Levelling - Bosch Quigo green Manual Original

20 | English
Take the batteries out of the measuring tool when you are not using it for a pro-
u
longed period of time. The batteries can corrode and self-discharge during pro-
longed storage.
Operation
Start-up
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or variations in
u
temperature. For example, do not leave it in a car for extended periods of time. In
case of large variations in temperature, allow the measuring tool to adjust to the ambi-
ent temperature before putting it into operation. The precision of the measuring tool
may be compromised if exposed to extreme temperatures or variations in temperat-
ure.
Avoid substantial knocks to the measuring tool and avoid dropping it. Damaging
u
the measuring tool can cause accuracy to be compromised. If the laser line is subjec-
ted to a substantial knock or is dropped, check it by comparing it to a known hori-
zontal or vertical reference line.
Switch the measuring tool off when transporting it. The pendulum unit is locked
u
when the tool is switched off, as it can otherwise be damaged by big movements.
Switching on/off
To switch on the measuring tool, push the on/off switch (4) up. Immediately after
switching on, the measuring tool sends two laser lines out of the outlet aperture (5).
Do not direct the laser beam at persons or animals and do not stare into the laser
u
beam yourself (even from a distance).
To switch off the measuring tool, push the on/off switch (4) downward over the laser
beam outlet aperture (5). The pendulum unit is locked when the tool is switched off.
Never leave the measuring tool unattended when switched on, and ensure the
u
measuring tool is switched off after use. Others may be blinded by the laser beam.

Automatic levelling

To work with automatic levelling, position the measuring tool on a level, firm surface or
attach it to the holder (16) or the tripod (11).
After switching on, the automatic levelling function automatically compensates irregular-
ities within the self-levelling range of ±4°. The levelling is finished as soon as the laser
lines stop flashing.
1 609 92A 4RH | (06.11.2018) Bosch Power Tools