Automatic Shut-Off; Automatic Levelling - Bosch GPL100-30G Instrucciones De Funcionamiento Y Seguridad

beam yourself (even from a distance).
To switch off the measuring tool, slide the on/off switch (2) to
the OFF position. The pendulum unit is locked when the tool is
switched off.
ing tool is switched off after use. Others may be blinded by the
laser beam.
If the maximum permitted operating temperature of 113 °F (45
°C) is exceeded, the tool shuts down to protect the laser di-
ode. Once it has cooled down, the measuring tool is operational
again and can be switched back on.
The measuring tool automatically switches itself off after 60 min
of operation.
If the switched on measuring tool is not within the self-levelling
range (the laser points flash continuously), the automatic shut-
off is reset to 60 min.
Position the measuring tool on a level, firm support or attach it
to a tripod (11).
To use the bottom laser point, rotate the measuring tool on the
magnetic rotating mount (3) in such a manner that the laser
point can be seen on the floor.
After switching on, the automatic levelling function automati-
GPL100-30G 50G 11-20.indd 17
Do not direct the laser beam at persons or
animals and do not stare into the laser
Never leave the measuring tool unattended
when switched on, and ensure the measur-

Automatic shut-off

Automatic Levelling

-17-
4/23/21 5:27 PM