User Maintenance Instructions - Rowenta Mosquito Protect Manual Del Usuario

OPERATING INSTRUCTIONS
– The trap can be placed on a firm surface or hung from a secure fixture using the attached
hanging hook.
–Place in a sheltered area out of direct exposure to rain.
–If hanging, place the trap at a height of 1.5-2m(4 - 6 feet) from the floor/ground.
–If placing on a surface, position vertically, away from heat and out of the reach of children.
–Connect power cord to Mosquito Protect and plug into power outlet.
–For household use only.

USER MAINTENANCE INSTRUCTIONS

–Clean the trap at least once per week.
–Unplug the power cord from outlet before unplugging from Mosquito Protect.
–Please remove the power plug before removing the collection container for cleaning.
– Remove the collection container and empty. During cleaning, there is a risk that certain
insects are still alive.
–Rinse out the container using warm soapy water to remove any stubborn buildup.
–Dry unit thoroughly and reassemble.
INSTRUCTIONS PERTAINING
TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
–To reduce the risk of electrical damage, do not put Mosquito Protect in water or other liquids.
–Do not position the unit near gas, oil or other flammable materials.
–Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI).
CAUTION
Risk of exposure to UV rays. Make sure the product is installed in order to not have the eyes
closer than 25cm from the LED light for safety reasons.
NOTE
The safety of this appliance complies with the technical rules and standards (Electromagnetic
Compatibility, Low Voltage, Environment).
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
12