Important Safety Instructions - Rowenta Mosquito Protect Manual Del Usuario

Thank you for purchasing your Mosquito Protect mosquito trap.
For best results from Mosquito Protect, please read the following instructions before
use and keep the manual properly for future reference.
This product operates on AC voltage from 100V to 240V.
Design and color of Mosquito Protect may be modified without notification for further
performance-improvement.
Design and color may differ from the picture shown on the package.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Please read the instruction manual and safety instructions carefully
before using the appliance and keep the instruction manual for reference.
For your safety, this appliance complies with all applicable standards and
regulations (Low Voltage, Electromagnetic Compatibility, Environmental
directives, etc.).
SAFETY INSTRUCTIONS
Check before use:
• The device must be powered only with the voltage indicated on the
power supply. Do not use any other power supply than the model
supplied by the manufacturer.
• 0034 :The appliance must only be used with the power pack
supplied 0034.
• When unplugging power cord, always pull the plug, and not the power
cord.
• Please remove any dust or water from the power plug.
• Connect the power adapter to Mosquito Protect before connecting
the power cord to an outlet. To avoid damage, do not connect or
disconnect the power adapter from Mosquito Protect while connected
to the power.
• Mosquito Protect is not waterproof. Please install in a sheltered area.
• Care should be taken when hanging Mosquito Protect not to pull or
swing on the unit.
• When installing and while using the product, please be sure to not have
the eyes closer than 25cm from the LED light for safety reasons.
• Do not disassemble, repair or modify the Mosquito Protect. It may cause
fire, electric shock, injury, or malfunction. If the product is abnormal,
please contact the distributor.
• This product is not intended for use outdoors.
EN
9