Wireless communication link
The remote control wireless communication link operates in
the 2.4 GHz ISM band using GFSK (Gaussian frequency-shift
keying) on 4 channels. The link uses a proprietary bidirectional
communication protocol and operates over a distance of at
least 2 metres from the processor. The wireless
communication link continuously switches between the 4
channels to avoid interference on any specific channel. The
remote control indicates via its display when the processor is
out of operating distance (or switched off) or when the link is
interrupted due to broad spectrum interference (see page 9).
Environmental protection
Your remote control contains electronic components subject
to the Directive 2002/96/EC on waste electrical and
electronic equipment.
Help protect the environment by not disposing of your
remote control or batteries with your unsorted household
waste. Please recycle your remote control and batteries
according to your local regulations.
Equipment classification
Your remote control is an accessory to a medical device as
described in the international standard IEC 60601-1:2005/
A1:2012, Medical Electrical Equipment – Part 1: General
Requirements for Basic Safety and Essential Performance.
CR310 REMOTE CONTROL USER GUIDE FOR KANSO 2
27