Important Instructions; Cleaning And Maintenance; Safety Cautions - Remington S9951 Manual Del Usuario

ENGLISH
Before use, make sure hair is clean, dry and tangle-free.
Plug in the unit, press and hold the on-off switch until LCD lights up. Temperature bars
flash until desired temperature is reached and then the unit will beep when ready to use.
Run the straightener through the entire length of the hair, without stopping.
Repeat only twice per section to prevent hair damage.
Due to the extreme heat capabilities of this styler, extra care should be taken when
using.
While heating and cooling, place on a flat, smooth, heat-resistant surface. Only hold unit at
the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
Ensure the unit is unplugged and cool. To maintain the effectiveness of your product wipe
clean after use with a damp cloth. Do not use an abrasive cleaning fluid to clean, as damage
will occur.
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION OF A
RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL OPERATING
CURRENT NOT EXCEEDING 30mA is ADVISABLE. ASK AN ELECTRICIAN
FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM,
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
2
110445_REM_IFU_S9951_21L.indd GB_2
INSTRUCTIONS FOR USE

IMPORTANT INSTRUCTIONS

CLEANING AND MA INTENANCE

SAFETY CAUTIONS

This product is not suitable for use in bath or shower.
24.06.11 16:31