Conceptronic C54NETCAM2 Guía De Instalación Rápida página 24

ENGLISH
Follow these steps to add a camera to the program:
- Click on the 'Settings' button located on the left under 'Controls'.
- Click on 'Camera List' in the tree view.
- Click on the 'Add Camera' button on the right.
- A new window is shown with all found network cameras. Select the right camera
and click on the 'Add Camera' button.
Note:
- A pop-up window will show asking for a user name and password. By default these
are both "admin".
- When the camera is added to the list in the main window, click the 'Cancel'
button.
- The camera is now added.
If the camera is not shown, try clicking the 'Search' button. If this does
not work, you can always enter the IP address of the camera, but you
need to know this address in order to do so.
24