Conceptronic C54NETCAM2 Guía De Instalación Rápida página 25

ENGLISH
Using the 'Smart Wizard' to enter the camera settings
• Select 'Camera Configuration' in the tree view and select the camera you have just
added. Now press the 'Link Webpage' button in order to open the web configuration.
• In the web configuration window, click on 'Setup' on the left. You will be asked to enter
the user name and password again. By default both are "admin".
• Click on 'Smart Wizard' in the left navigation pane.
• The Smart Wizard will be shown with the 'Camera Setting' page.
The following options can be set or changed:
- Camera Name
- Location
- Admin password
: If you want, you can give the camera an other name. This
name will show up in the camera list.
: Optionally, you can enter the location of the camera. For
instance, if you use multiple cameras you can enter the name
of the room each camera is in.
: For safety reasons, it is recommended to change the default
password into something else. If you don't want to change it,
you need to enter the default password ("admin"), otherwise
the password will be removed and no password is needed to
enter the configuration. Enter the same password in the
'Confirm Password' field.
25