Warranty Terms - Bossini D48000 Instrucciones Para La Instalación Y El Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
GB
INSTALLATION
FLAT Slide rail bar with incorporated water elbow.
The Flat Slide rail bar in brass is 1100 mm in length and incorporates a water elbow into its bottom or top support, according
to your needs (Fig. A). The side supports are adjustable, thus allowing the rail to be mounted in any position, to perfectly adapt
to any pre-existent holes. Max drill distance between centers: 1000 mm.
INSTALLATION
-
Check position of water elbow (Fig A), identifying one of the two installation solutions possible (A or B).
-
Mark wall support (5) fastening point (Fig. B). Make sure that the rail is at a right angle with the floor.
-
Drill the holes with an Ø 8 mm drill bit (Fig. B)
-
Mount the support (5) with the yoke turned upwards. Screw in the water elbow (11) complete with flange (12)
(Fig.C)
-
Assemble the rail by mounting:
-Sliding support (2) with yoke turned upwards
-Central sliding support (7) keeping conical coupling left.
-Bottom water elbow support (14) (Fig. D)
-
Insert the spring (4) followed by the bushing fasteners (3) in the bracket seat (2), sliding them until they are snugly
lodged into the seat (Fig.D).
-
Insert the support (2) into the flange (5) and the support (14) into the wall water elbow (11). (Fig. E)
-
Lock the support (2) by pushing the spring (4) and twisting the bushing fastener (3) clockwise
until the assembly snaps firmly into place. (Fig. E)
-
Mount support (14) to the water elbow (11) by screwing in the dowels (13) (Fig. E)
-
Mount the showerhead (9) and hose (8)
CLEANING
Dear Customer,
Congratulations for choosing a Bossini product and we thank you for the trust you have given us. To keep the material's
appearance as long as possible, a few guidelines must be followed.
Cleaning metal parts: water contains calcium that deposits on surfaces and forms unpleasant spots. For routine
cleaning, simply use a damp cloth with a little soap, rinse and dry. Calcium spots can therefore be avoided by drying
after use.
Important note: Using only a soap-based detergent is recommended. Never use abrasive detergents or disinfectants
or those containing alcohol, hydrochloric acid or phosphoric acid, Bleach, chlorine etc
Cleaning the rubber nozzles: the showerhead is equipped with the "Easy-Clean" system with silicon nozzles. Calcium
is a shower's worst enemy and that is why Bossini proposes theEasy-Clean" system. These silicon nozzles are extremely
heat resistant and with hot water they dilate, thus detaching the first layer of calcium. Moreover, periodically rubbing
the silicon nozzles manually easily gets rid of calcium. With one simple gesture, your shower is always perfect.
Dear Customer, we would like to remind you that the warranty on our product's surface is not valid if the material
undergoes treatment different than that suggested. The warranty does not cover any damage due to deposits of
calcium or impurities.

WARRANTY TERMS

Dear Customer,
We congratulate you and thank you for choosing a Bossini quality product.
The product is covered by 2 Years warranty against any defects due to manufacturing faults.
The warranty does not cover damages caused by improper installation or use, neglect, incorrect plumbing, normal
fair wear and tear, damages caused by limescale deposits or impurities, the use of detergents and maintenance
products other than those specifically recommended in our instructions manual. Furthermore Bossini is not responsible
for labour costs and/or damages, whether accidental or consequent to the installation, repairing or replacement of the
product.
The request for replacement under the terms of this warranty must be made in a letter setting out the date and place of
purchase and giving a brief explanation of the problem. The letter must be received by us within the warranty period
and must be accompanied by proof of the purchase date (e.g. a receipt). The warranty only covers production faults
/ defects and is strictly limited to the repair or free replacement of the parts which are recognised to be defective. The
defective parts have to be returned to Bossini carriage free with a report describing the defect. Bossini reserves the right
to inspect the part alleged to be faulty or defective and to evaluate the applicability of the warranty terms.
The warranty period commences on the date the product is purchased, evidenced by the relevant purchase
document (e.g. receipt, invoice, cash voucher) and it is NOT renewable.
For further information please contact Bossini or its distributor.
D48000
11

Publicidad

Tabla de contenido
loading

Tabla de contenido