Ingersoll Rand 5 Serie Especificaciones Del Producto página 5

EN
NOTICE
The most satisfactory adjustment is usually obtained by use of the Tool on the actual
application, and increasing or decreasing the delivered torque until the desired
setting is reached. In any event it is recommended that final adjustment be made by
gradual progression. Observe also that the clutch, when equipped with the Heavy
Spring, can be set beyond the torque capacity of the high speed,
low-torque Tools, in which case the Tool will stall before the clutch ratchets.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80167273_ed1 EN-3