Intended Use; Assembly And Adjustments - Facom FCL045 Manual Original

Date Code Position
The date code, which also includes the year of manufacture is printed into the housing.
Example 2017 XX XX
Year of Manufacture
Description
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
1 Extendable hooks
2 Worklight
3 Motion sensor button
4 Power button
5 Lens
6 Motion sensor
7 Battery
8 Release button

Intended Use

Your cordless magnetic LED under-bonnet light has been designed for professional lighting applications.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
This under-bonnet light is a professional tool.
DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
• Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
• This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.

Assembly and adjustments

WARNING: To reduce the risk of serious personal injury, turn under-bonnet light off and disconnect battery pack before making
any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
WARNING: Use only FACOM battery packs and chargers.
NOTE: This product contains long-life Light Emitting Diode bulbs (LED). These LED bulbs are not replaceable. When the LED bulbs reach the end of life, the
under-bonnet light / detachable work light should be recycled or disposed of through available channels for electrical waste and electronic equipment.
Installing and Removing the Battery Pack (Fig. C)
NOTE: Make sure your battery pack
To Install the Battery Pack into the Under-bonnet light
1. Align the battery pack with the rails inside the under-bonnet light's handle (Fig. C).
7
2. Slide it into the handle until the battery pack is firmly seated in the under-bonnet light and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button and firmly pull the battery pack out of the under-bonnet light's handle.
8
2. Insert battery pack into the charger as described in the charger section of this manual.
NU-FCL045_0817.indd 20
7 is fully charged.
20
04/08/2017 09:34:06