Connections; Audio & Video Connections; Usb Connection; Headphone Connection - Lenco DVP-733 Manual De Instrucciones

Audio and Video Connections
1. Refer to the owner's manual of the external device as well.
2. Before connecting the power source,

USB Connection

The USB memory stick should be plug in the unit directly.
USB extension cable should not be used to avoid failing of data
transferring and interference caused.
1. Insert the USB into the USB port on the left panel of the main unit.
press and hold the LCD MODE/USB button to enter source mode. Press the Up/Down direction button to
select USB and then press ENTER to access.
2. It takes a short while for the unit's reading data. After the device is detected, the screen will display the
working menu, press the direction buttons to select the desired file from the menu and press Play/Pause to
start playback.

Headphone Connection

Be sure that your unit is at low volume level before con-
necting the headphones. Increase the volume gradually
for your comfortable listening.
CAUTION:
Hearing experts advise against the constant use of per-
sonal stereos played at high volume. Constant high vol-
ume use can lead to hearing loss. If you experience ring-
ing in the ears or hearing loss, discontinue use and seek
medical advise.

CONNECTIONS

ensure that all the connections are properly done.
14
With no disc loaded or in stop mode,
To Headphone Jack