There is no power to the device.
•
Ensure that the Power Switch on the main unit is physically set to the ON position.
•
Ensure that the AC adapter cord is securely connected to the player and the proper wall outlet.
The device will not play the disc.
•
Ensure that a supported disc is loaded in the player label-side up.
•
Ensure that the disc's rating level does not exceed the player's parental rating level.
•
Ensure that the disc is not damaged or too dirty.
•
Clean the disc or try another disc.Moisture may have condensed inside the player. Remove the disc and
leave the player on for 1-2 hours and then try again.
There is no picture.
•
Ensure that the TV set has been powered on and is set to the correct AV mode.
•
Ensure that the connections between the player and the TV are secure and correct.
•
Check if the connection cables are damaged.
The picture is noisy or distorted.
•
The disc may be damaged or dirty. Clean the disc or try another one.
•
Reset your TV's color system.
•
Ensure that the player is connected directly to the TV (and not through a VCR, cable box, satellite re-
ceiver, etc.)
The picture is not full-screen.
•
Change the aspect ratio setting of your player from the Setup menu.
•
Select a different aspect ratio option from the DVD disc menu.
There is no sound or distorted sound.
•
Ensure that the TV and amplifier have been turned on and properly set up.
•
Ensure that the TV and amplifier connections are secure and correct.
•
Try a different Audio track of the DVD by pressing AUDIO.
•
Ensure that the MUTE function of the TV, Amplifier, or Player is not engaged.
TROUBLESHOOTING
24