Operating Controls; Use As Intended - Wurth Master SBS 1100-E Traducción Del Manual De Instrucciones De Servicio Original

SBS 1100-E.book Seite 8 Montag, 17. Januar 2011 12:04 12
GB
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future
reference.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a „live" wire
may make exposed metal parts of the power tool
„live" and could give the operator an electric
shock.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Keep mains lead clear from working range of the
machine. Always lead the cable away behind you.
Connect machines that are used in the open via a
residual current circuit breaker with a triggering
current of 30 mA maximum. Use only extension
cables that are intended for outdoor use and are
protected against splash water.
When the cut is completed, switch off the machine
and then pull the saw blade out of the cut only after
it has come to a standstill (danger of kick-back).
Use only sharp, flawless saw blades. Replace
immediately cracked, bent or dull saw blades.
When working, the guide frame 2 must always be
in contact with the workpiece. Only plug-in when
machine is switched off.
The machine must be operated only with the asso-
ciated protective devices.

Operating Controls

1 Saw blade
2 Guide shoe
3 On/Off switch with speed control function
4 Clamping ring for saw blade holder
Not all of the accessories illustrated or described are included
as standard delivery.
8
Safety warnings for sabre saws
Do not fasten any additional labels on the motor,
the handle, or the gear.
During pauses in the work, when not in use or
during work on the machine itself (e.g., changing
of the working tools, repairs, cleaning, adjust-
ment), pull the mains plug.
Use only original Würth parts and accessories.
For further notes on safety refer to enclosed Sheet
This sabre saw cuts wood, plastic, and metal. It cuts
curves and can cut flush to a surface.
For damage caused by usage other then intended,
the user is responsible.
Working safely with this machine is
possible only when the operating and
safety information are read comple-
tely and the instructions contained
therein are strictly followed. In addi-
tion, the general safety instructions in
the enclosed booklet must be follo-
wed.
If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a dama-
ged cable.
The machine must not be damp and
must also not be operated in damp
surroundings.
Wear safety goggles and dust mask.
Wear protective gloves and sturdy
shoes.

Use as Intended