Led Indicators; Connecting To Other Devices - Jura Smart Connect Modo De Empleo

LED indicators

Z LED does not light up: The coffee machine is switched off; the Smart Connect is not being
supplied with power.
Z LED lights up: The wireless connection between the Smart Connect and the accessory has
been established.
Z LED flashes (1x / second): Attempting to establish a wireless connection.

Connecting to other devices

The Smart Connect can be used for various wireless-enabled accessories.
T
Position the accessory near the coffee machine (a maximum of 0.5 m away).
T Switch on the accessory and the coffee machine.
T
Press the reset button of the Smart Connect (e.g. with a pen).
T Then, within 30 seconds, press the reset button on the accessory.
The LED lights up to indicate that a connection has been established with the accessory.
If a device is switched off and then on again, the wireless connection is re-established auto-
matically.
Contact
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 389 82 33
You will find additional contact details for your country at www.jura.com.
en
7