Intended Use; Identification Plate; Operating Controls - Cub Cadet LH5 C60 Instrucciones De Funcionamiento Originales

EN
¾ Removal of the protective equipment must
only be performed with the motor stationary
and the power pack removed.
¾ Ensure that ventilation slots are free from dirt.
¾ Do not clean the device with water.
¾ Activate the chain brake.
General safety information
¾ Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions, remove
the power pack in advance.
¾ Repairs must only be performed by a qualified
technician or service centre. Specialist work-
shop addresses can be found on our website.

Intended use

This tool is intended solely
- for use as a chainsaw with the authorised original
cutting chains and guide bars for sawing branches
and for sawing tree trunks up to 35 cm in diame-
ter.
- for use in accordance with the descriptions and
safety instructions given in this operating manual.
The chainsaw is not designed for commercial use
and may only be used at home and in the garden.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Identification plate V
The identification plate is located on the casing of
the tool.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
30
Safety information
¾ Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and fires.
¾ Regularly check all screw or bolt joints to
ensure they have not come loose.
¾ Ensure maintenance work is always per-
formed to schedule. This ensures that the safety
of the power tool is maintained.
¾ Please note that improper maintenance, using
non-compliant spare parts and the removal or
modification of safety equipment can damage
the device and cause serious injury to the
person working with it.
Layout
1 Manufacturer
2 Year of manufacture
3 Device group
4 Rated voltage, current type
5 Model name
6 Current strength
7 Maximum guide bar length
8 Chain speed
9 Disposal note
10 CE mark
11 Guaranteed sound level
12 Model number
13 Serial number barcode
14 Serial number
Operating controls A
A On/off switch on handle
B Lockout switch
C Hand guard with chain brake function
D Cutting bar (guide bar)
E Cutting chain
F Sprocket cover
G Spirit level
H Locking button for blade adjustment
I Rotary knob for setting the chain tension
J Oil fill level indicator
K Protective cover
L Handle
M Bow-shaped handle
N Power pack release
O Oil tank cap
P Power pack compartment

Operating controls

Intended use