Master Trimmer MT Tumbler 200 Manual De Uso página 21

Remove the polycarbonate cover with the help of
7
the handle.
Remove the barrel .
9
Remove the blade. Pull the two positioners out and turn them 90°. Hold the blade carefully and remove
10
it from the machine. (Make sure that the blade is in a good condition. If it is bent, twisted or if it has some
scratches you should change the blade. Otherwise it could damage the machine).
90 °
Pull the 2 positioners towards the
8
inside and rotate them 90° to separate
the two parts of the trimmer (A) and
remove the
module) with the handles.
90°
90 °
front part (electrical
90°
X
21