Master Trimmer MT Tumbler 200 Manual De Uso página 23

Insert the barrel, making use of the supporting
3
wheels. The guides must slot into the wheels.
Replace the polycarbonate cover.
5
Replace the hopper (C).
7
Bring it towards the rear part of the trimmer (A),
4
bearing in mind the marks added to the image
below. The indicators must be aligned. If they are
not, lightly rotate the gear without forcing it.
When they are aligned, pull the positioners
towards the inside and rotate them 90°. (UNDER
NO CIRCUMSTANCES USE FORCE TO CLOSE THE
TRIMMER).
Put the trimmer (A) on top of the leaf collector (B).
6
Make use of the guides to position it correctly.
Replace the belt seal (E).
8
23