Torque-Controlled Tightening (0-360°) - Gedore 8200-01 Instrucciones De Manejo

EN
2.2 Torque-controlled tightening
(0-360°)
WARNING
ALWAYS see to it that you do not
exceed the torque wrench's and the
torque gauge's maximum load
capacity, including the values obtained
by angle tightening.
Incorrect torque-controlled tightening
can cause the screw connection to
break.
When adjusting the torque wrench and
torque gauge, always follow the
specifications for the screw
connection.
Once the joining moment has been
reached, the torque wrench must be
adjusted to its max. permissible
torque.
Select the appropriate torque gauge.
Insert the torque gauge between the
torque wrench's square drive and the
application tool's adaptor square.
12