Publicidad
Wireless noise canceling stereo headset
Reference Guide
Manuel de référence
Guía de referencia
WF-1000X
©2017 Sony Corporation
Printed in Malaysia
4-724-043-11(2)
http://www.sony.net/
This device complies with Industry Canada's
Headset: WF-1000XL, WF-1000XR
licence-exempt RSSs. Operation is subject to
FCC ID: AK8WF1000X
the following two conditions:
IC: 409B-WF1000X
(1) This device may not cause interference;
and
(2) This device must accept any interference,
English
including interference that may cause
undesired operation of the device.
FOR UNITED STATES CUSTOMERS.
This equipment complies with FCC/IC
NOT APPLICABLE IN CANADA,
radiation exposure limits set forth for an
INCLUDING IN THE PROVINCE OF
uncontrolled environment and meets the
QUEBEC.
FCC radio frequency (RF) Exposure Guidelines
and RSS-102 of the IC radio frequency (RF)
POUR LES CONSOMMATEURS AUX
Exposure rules. This equipment has very low
ÉTATS-UNIS. NON APPLICABLE AU
levels of RF energy that is deemed to comply
CANADA, Y COMPRIS LA PROVINCE
without testing of specific absorption rate
DE QUÉBEC.
(SAR).
This device complies with Part 15 of the
The Bluetooth® word mark and logos are
FCC Rules. Operation is subject to the
registered trademarks owned by the
following two conditions: (1) this device
Bluetooth SIG, Inc. and any use of such
may not cause harmful interference, and
marks by Sony Corporation is under license.
(2) this device must accept any
interference received, including
The N-Mark is a trademark or registered
interference that may cause undesired
trademark of NFC Forum, Inc. in the United
operation.
States and in other countries.
You are cautioned that any changes or
Windows is a registered trademark or
modifications not expressly approved in
trademark of Microsoft Corporation in the
this manual could void your authority to
United States and/or other countries.
operate this equipment.
Mac, OS X, iPhone and iPod touch are
This equipment must not be co-located or
trademarks of Apple Inc., registered in the
operated in conjunction with any other
U.S. and other countries.
antenna or transmitter.
"Made for iPod" and "Made for iPhone" mean
Note
that an electronic accessory has been
This equipment has been tested and
designed to connect specifically to iPod or
found to comply with the limits for a Class
iPhone, respectively, and has been certified
B digital device, pursuant to Part 15 of the
by the developer to meet Apple performance
FCC Rules. These limits are designed to
standards. Apple is not responsible for the
provide reasonable protection against
operation of this device or its compliance
harmful interference in a residential
with safety and regulatory standards. Please
installation. This equipment generates,
note that the use of this accessory with iPod
uses and can radiate radio frequency
or iPhone may affect wireless performance.
energy and, if not installed and used in
accordance with the instructions, may
Android is a trademark of Google Inc.
cause harmful interference to radio
Other trademarks and trade names are those
communications. However, there is no
of their respective owners.
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
Precautions
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
On BLUETOOTH communications
user is encouraged to try to correct the
BLUETOOTH wireless technology operates
interference by one or more of the
within a range of about 10 m (30 feet).
following measures:
Maximum communication range may vary
– Reorient or relocate the receiving
depending on obstacles (human body,
antenna.
metal, wall, etc.) or electromagnetic
– Increase the separation between the
environment.
equipment and receiver.
The antenna is built into the unit as
– Connect the equipment into an outlet
illustrated in the dotted line. The sensitivity
on a circuit different from that to which
of the BLUETOOTH communications will
the receiver is connected.
improve by turning the direction of the
– Consult the dealer or an experienced
built-in antenna to the connected
radio/TV technician for help.
BLUETOOTH device. When obstacles are
between the antenna of the connected
device and the built-in antenna of this unit,
noise or audio dropout may occur, or
communications may be disabled.
BLUETOOTH communications may be
If the length of time you can use the unit
disabled, or noise or audio dropout may
became extremely short, the rechargeable
occur under the following conditions.
battery should be replaced with a new
– There is a human body between the unit
one. Please contact your nearest Sony
and the BLUETOOTH device.
dealer for a battery replacement.
This situation may be improved by
Note on static electricity
placing the BLUETOOTH device facing
Static electricity accumulated in the body
the antenna of the unit.
may cause mild tingling in your ears. To
– There is an obstacle, such as metal or
minimize the effect, wear clothes made
wall, between the unit and the
from natural materials.
BLUETOOTH device.
If the unit does not operate properly
– A device using 2.4 GHz frequency, such
Reset the unit.
as a Wi-Fi device, cordless telephone, or
When resetting this unit, charge the unit.
microwave oven, is in use near this unit.
When charging starts, this unit is reset
Because BLUETOOTH devices and Wi-Fi
automatically. The pairing information and
(IEEE802.11b/g/n) use the same frequency
the other settings are retained.
(2.4 GHz), microwave interference may
occur resulting in noise or audio dropout
or communications being disabled if this
unit is used near a Wi-Fi device. In such a
case, perform the following.
– Use this unit at least 10 m (30 feet) away
from the Wi-Fi device.
– If this unit is used within 10 m (30 feet)
of a Wi-Fi device, turn off the Wi-Fi
device.
– Install this unit and the BLUETOOTH
device as near to each other as possible.
Microwaves emitting from a BLUETOOTH
device may affect the operation of
electronic medical devices. Turn off this
unit and other BLUETOOTH devices in the
If the problem persists even after the
following locations, as it may cause an
resetting operation above, initialize the
accident:
unit as follows.
– where inflammable gas is present, in a
First, remove the unit from the charging
hospital, or a petrol station
case. Hold down the button on the L (left)
– near automatic doors or a fire alarm.
side for more than 2 seconds and confirm
Do not use the unit on an airplane. Radio
that the units on the L (left) and R (right)
waves may affect instruments, causing an
sides turn off. Then hold down the buttons
accident due to malfunction.
on the L and R sides simultaneously for
Due to the characteristic of the wireless
more than 15 seconds. The indicator (blue)
technology, the sound played on this unit
flashes 4 times, and the unit is reset to the
is delayed from the sound and music
factory settings. All pairing information is
played on the sending device. Therefore,
deleted.
the image and sound may be misaligned
After the unit is initialized, it may not
when viewing a movie or playing a game.
connect to your iPhone or computer. In this
This unit supports security capabilities that
case, delete the pairing information of the
comply with the BLUETOOTH standard to
unit from the iPhone or computer, and
provide a secure connection when the
then pair them again.
BLUETOOTH wireless technology is used,
What is noise canceling?
but security may not be enough
The noise canceling circuit actually senses
depending on the setting. Be careful when
communicating using BLUETOOTH wireless
outside noise with built-in microphones
and sends an equal-but-opposite
technology.
We do not take any responsibility for the
canceling signal to the unit.
leakage of information during BLUETOOTH
– The noise canceling effect may not be
communications.
pronounced in a very quiet environment,
Connection with all BLUETOOTH devices
or some noise may be heard.
– Depending on how you wear the unit,
cannot be guaranteed.
– A device featuring BLUETOOTH function
the noise canceling effect may vary or a
is required to conform to the BLUETOOTH
beeping sound (howling) may occur. In
standard specified by Bluetooth SIG, Inc.
these cases, take off the unit and put it
and be authenticated.
on again.
– The noise canceling function works for
– Even if the connected device conforms
to the above mentioned BLUETOOTH
noise in the low frequency band
standard, some devices may not be
primarily. Although noise is reduced, it is
connected or work correctly, depending
not canceled completely.
on the features or specifications of the
– When you use the unit in a train or a car,
device.
noise may occur depending on street
– While talking on the phone hands free,
conditions.
– Mobile phones may cause interference
noise may occur, depending on the
device or communication environment.
and noise. Should this occur, locate the
Depending on the device to be connected,
unit further away from the mobile
it may require some time to start
phone.
communications.
– Do not cover the microphones of the
unit with your hands. The noise
If sound skips frequently during
canceling function or the Ambient Sound
playback
Mode may not work properly, or a
The situation may be improved by setting
beeping sound (howling) may occur. In
the sound quality mode to "priority on
these cases, take your hands off of the
stable connection." For details, refer to the
microphones of the unit.
Help Guide.
Microphones
The situation may be improved by
changing the wireless playback quality
settings or fixing the wireless playback
mode to SBC on the transmitting device.
For details, refer to the operating
instructions supplied with the transmitting
device.
If you are using a smartphone, the
situation may be improved by shutting
down unnecessary applications or
rebooting the smartphone.
Others
Do not place this unit in a place exposed to
On the use of calling apps for
humidity, dust, soot or steam, or subject to
smartphones and computers
direct sunlight. Do not leave the unit in a
This unit supports normal incoming calls
car for a long time. It may cause a
only. Calling apps for smartphones and
malfunction.
computers are not supported.
Using the BLUETOOTH device may not
On charging the unit
function on mobile phones, depending on
This unit can be charged using USB only.
radio wave conditions and location where
Personal computer with USB port is
the equipment is being used.
required for charging.
High volume may affect your hearing.
This unit cannot be turned on, nor can the
For traffic safety, do not use while driving
BLUETOOTH and noise canceling functions
or cycling.
be used, during charging.
Do not use the unit in places where it
If you do not use the unit for a long time,
would be dangerous if you are unable to
the rechargeable battery may not be able
hear ambient sound, such as at railroad
to keep sufficient charge. The battery will
crossings, train station platforms, and
be able to keep a charge properly after
construction sites.
repeatedly discharging and charging
Do not put weight or pressure on this unit
several times.
as it may cause the unit to deform during
If you store the unit for a long time, charge
long storage.
the battery once every half year to prevent
Do not subject the unit to excessive shock.
over-discharge.
Clean the unit with a soft dry cloth.
Do not expose the unit to water. The unit is
Included items:
not waterproof.
Wireless noise canceling stereo headset
Remember to follow the precautions
(1)
below.
Micro-USB cable (approx. 50 cm (19 3/4
– Be careful not to drop the unit into a sink
in.)) (1)
or other container filled with water.
Charging case (1)
– Do not use the unit in humid locations or
Long Hybrid silicone rubber earbuds
bad weather, such as in the rain or snow.
(SS/S/M/L 2 each)
– Do not get the unit wet.
Triple-comfort earbuds (S/M/L 2 each)
If you touch the unit with wet hands, or
Fitting supporters (M/L 2 each)
put the unit in a damp article of clothing,
Reference Guide (this sheet) (1)
the unit may get wet and this may cause
Operating Instructions (1)
a malfunction of the unit.
Other documents (1 set)
If you experience discomfort after using
1)
The actual range will vary depending on
the unit, stop using the unit immediately.
factors such as obstacles between
Install the earbuds firmly. If an earbud
devices, magnetic fields around a
accidentally detaches and is left in your
microwave oven, static electricity,
ear, it may cause injury.
reception sensitivity, antenna's
Since children may swallow small parts
performance, operating system, software
such as the unit and earbuds, store the
application, etc.
unit in the charging case after use and
2)
BLUETOOTH standard profiles indicate the
keep it out of the reach of children.
purpose of BLUETOOTH communications
If you have any questions or problems
between devices.
concerning this unit that are not covered in
3)
Codec: Audio signal compression and
this manual, please consult your nearest
conversion format
Sony dealer.
4)
Subband Codec
5)
Advanced Audio Coding
About triple-comfort earbuds
Supplied triple-comfort earbuds provide a
Wireless noise
snug fit for effective attenuation of
ambient noise.
canceling stereo
– Prolonged use of snugly fitting earbuds
headset
may strain your ears. If you experience
discomfort, discontinue use.
Power source:
– Do not pull only the foamed silicone
DC 3.7 V: Built-in lithium-ion
portion of the earbuds. If the foamed
rechargeable battery
silicone portion is separated from the
DC 5 V: When charged using USB
earbuds, the earbuds will not function.
Mass: Approx. 6.8 g (0.24 oz) (Headset)
– Do not subject the foamed silicone
Approx. 70 g (2.5 oz) (Charging case)
portion to pressure over long periods, as
Operating temperature: 0 °C to 40 °C (32 °F
it may cause deformation.
to 104 °F)
– The varying sizes of the holes on the
Usage hours:
foamed silicone portion have no effect
When connecting via the BLUETOOTH
on the sound quality.
device
– You may hear a cracking noise in your
Music playback time:
ears when wearing the earbuds. This is
Max. 3 hours (NC ON), Max. 3 hours
not a malfunction.
(NC OFF)
– Foam materials deteriorate by long-term
Communication time:
and storage. Replace with new materials
Max. 3.5 hours
if the deterioration hinders the original
Standby time:
function.
Max. 8 hours (NC ON), Max. 35 hours
(NC OFF)
Optional replacement earbuds can be
Note: Usage hours may be shorter
ordered from your nearest authorized
depending on the Codec and the
Sony retailer or www.sony.com.
conditions of use.
Charging time:
Approx. 1.5 hours
You are cautioned that any changes or
(About 70 minutes of music playback is
modifications not expressly approved in
possible after 15 minutes charging.)
this manual could void your authority to
(Headset)
operate this equipment.
Approx. 3 hours (Charging case)
Note: Charging hours may be different
depending on the conditions of use.
Charging temperature: 5 °C to 35 °C (41 °F to
Compatible
95 °F)
iPhone/iPod
Receiver
Type: Closed, Dynamic
models
Driver unit: 6 mm
Microphone
You can use the unit with only the following
models. Update your iPhone or iPod to the
Type: Electret condenser
latest software before use.
Directivity: Omni directional
iPhone 7 Plus
Effective frequency range: 50 Hz - 8,000 Hz
iPhone 7
iPhone SE
System requirements
iPhone 6s Plus
for battery charge using
iPhone 6s
iPhone 6 Plus
USB
iPhone 6
iPhone 5s
(As of August 2017)
Personal Computer with pre-installed with
iPhone 5c
any of the following operating systems and
iPhone 5
USB port:
iPod touch (6th generation)
(As of August 2017)
Operating Systems
(when using Windows)
Windows
®
10 Home / Windows
Specifications
Windows
®
8.1 / Windows
®
8.1 Pro
Windows
®
8 / Windows
®
8 Pro
Windows
®
7
General
Home Basic / Home Premium /
Professional / Ultimate
Communication system: BLUETOOTH
Specification version 4.1
(when using Mac)
Output: BLUETOOTH Specification Power
Mac OS X (version.10.9 or later)
Class 1
Design and specifications are subject to
Maximum communication range: Line of
change without notice.
sight approx. 10 m (30 ft)
1)
Frequency band: 2.4 GHz band (2.4000 GHz
- 2.4835 GHz)
Français
Compatible BLUETOOTH profiles
2)
:
A2DP (Advanced Audio Distribution
Le présent appareil est conforme aux CNR
Profile)
d'Industrie Canada applicables aux appareils
AVRCP (Audio Video Remote Control
radio exempts de licence. L'exploitation est
Profile)
autorisée aux deux conditions suivantes :
HFP (Hands-free Profile)
1) l'appareil ne doit pas produire de
HSP (Headset Profile)
brouillage;
3)
4)
5)
Supported Codec
: SBC
, AAC
2) l'utilisateur de l'appareil doit accepter tout
Supported content protection method:
brouillage radioélectrique subi, même si le
SCMS-T
brouillage est susceptible d'en
Transmission range (A2DP):
compromettre le fonctionnement.
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
Cet équipement est conforme aux limites
d'exposition aux rayonnements énoncées
pour un environnement non contrôlé et
respecte les règles les radioélectriques (RF)
Les émissions d'hyperfréquences d'un
de la FCC lignes directrices d'exposition et
périphérique BLUETOOTH peuvent
d'exposition aux fréquences radioélectriques
perturber le fonctionnement des appareils
(RF) CNR-102 de l'IC. Cet équipement émet
médicaux électroniques. Pour éviter de
une énergie RF très faible qui est considérée
causer un accident, éteignez cet appareil
conforme sans évaluation du débit
et les autres périphériques BLUETOOTH
d'absorption spécifique (DAS).
dans les endroits suivants :
– en présence de gaz inflammable, dans
La marque et les logos Bluetooth® sont des
un hôpital ou une station-service
marques déposées de Bluetooth SIG, Inc. qui
– à proximité de portes automatiques ou
sont utilisées sous licence uniquement par
d'un avertisseur d'incendie.
Sony Corporation.
N'utilisez pas l'appareil dans un avion.
N-Mark est une marque commerciale ou une
Les ondes radio risquent de perturber les
instruments et de provoquer un accident
marque déposée de NFC Forum, Inc. aux
en raison d'un problème de
États-Unis et dans d'autres pays.
fonctionnement.
Windows est une marque déposée ou une
En raison des caractéristiques de la
marque de commerce de Microsoft
technologie sans fil, le son reproduit sur
Corporation aux États-Unis et/ou dans
cet appareil est décalé par rapport au son
d'autres pays.
et à la musique en cours de lecture sur le
périphérique émetteur. Par conséquent,
Mac, OS X, iPhone et iPod touch sont des
l'image et le son peuvent être désalignés
marques commerciales de Apple Inc.,
lorsque vous visionnez un film ou jouez à
déposées aux États-Unis et dans d'autres
un jeu.
pays.
Cet appareil prend en charge les
Les mentions « Made for iPod » et « Made for
caractéristiques de sécurité conformes à la
iPhone » signifient qu'un accessoire
norme BLUETOOTH pour offrir une
électronique a été conçu spécifiquement
connexion sécurisée lors de l'utilisation de
pour être connecté à un iPod ou un iPhone,
la technologie sans fil BLUETOOTH;
respectivement, et que son fabricant certifie
cependant, la sécurité pourrait être
qu'il répond aux normes de performance
insuffisante selon le réglage. Soyez
Apple. Apple n'est pas responsable du bon
prudent lorsque vous communiquez au
fonctionnement de cet appareil ni de sa
moyen de la technologie sans fil
conformité aux normes réglementaires et de
BLUETOOTH.
sécurité. Veuillez noter que l'utilisation de cet
Nous ne pouvons être tenus responsables
accessoire avec un iPod ou un iPhone peut
de la fuite d'informations survenant lors
avoir un impact sur les performances de la
de communications BLUETOOTH.
connexion sans fil.
La connexion ne peut pas être garantie
avec tous les périphériques BLUETOOTH.
Android est une marque commerciale de
– Un périphérique doté de la fonction
Google Inc.
BLUETOOTH est nécessaire pour la
Les autres marques commerciales et noms
conformité à la norme BLUETOOTH
commerciaux appartiennent à leurs
spécifiée par Bluetooth SIG, Inc. et pour
propriétaires respectifs.
l'authentification.
– Même si le périphérique connecté est
conforme à la norme BLUETOOTH
Précautions
mentionnée précédemment, certains
périphériques peuvent ne pas se
connecter ou ne pas fonctionner
Communications BLUETOOTH
correctement, selon leurs
La technologie sans fil BLUETOOTH
caractéristiques ou spécifications.
fonctionne dans un rayon d'environ 10 m
– Selon le périphérique ou
(30 pieds). La portée de communication
l'environnement de communication, des
maximale peut varier en fonction des
parasites peuvent se produire lors des
obstacles (personnes, objets métalliques,
communications téléphoniques en
murs, etc.) ou de l'environnement
mains libres.
électromagnétique.
Selon le périphérique à connecter, le
L'illustration ci-dessous indique
démarrage des communications peut
l'emplacement de l'antenne intégrée sur
prendre un certain temps.
l'appareil. Vous pouvez améliorer la
Si le son est fréquemment saccadé
sensibilité des communications
pendant la lecture
BLUETOOTH en orientant l'antenne
Vous pourriez améliorer la situation en
intégrée vers le périphérique BLUETOOTH
réglant le mode de qualité sonore à
connecté. Lorsque des obstacles se
« priorité à la connexion stable ». Pour plus
trouvent entre l'antenne du périphérique
de détails, reportez-vous au manuel d'aide.
connecté et l'antenne intégrée de cet
Vous pourriez améliorer la situation en
appareil, des parasites ou des pertes de
modifiant les réglages de qualité de
niveau audio peuvent se produire, ou les
lecture sans fil ou en réglant le mode de
communications peuvent être
lecture sans fil à SBC sur le périphérique
interrompues.
émetteur. Pour plus de détails,
reportez-vous au mode d'emploi fourni
avec le périphérique émetteur.
Si vous utilisez un téléphone intelligent,
vous pourriez améliorer la situation en
fermant des applications inutiles ou en
redémarrant le téléphone intelligent.
À propos de l'utilisation d'applications
Les communications BLUETOOTH peuvent
d'appel pour les téléphones intelligents
être interrompues, ou bien des parasites
et ordinateurs
ou des pertes de niveau audio peuvent se
Cet appareil prend uniquement en charge
produire dans les conditions suivantes.
les appels entrants normaux. Les
– Une personne se trouve entre l'appareil
applications d'appel pour les téléphones
et le périphérique BLUETOOTH.
intelligents et ordinateurs ne sont pas
Vous pourriez améliorer la situation en
prises en charge.
plaçant le périphérique BLUETOOTH face
Chargement de l'appareil
à l'antenne de l'appareil.
®
10 Pro
Cet appareil peut être chargé uniquement
– Un obstacle, par exemple un objet
métallique ou un mur, se trouve entre
par USB. Un ordinateur personnel avec
port USB est requis pour le chargement.
l'appareil et le périphérique BLUETOOTH.
Lors du chargement, il n'est pas possible
– Un appareil utilisant une fréquence de
de mettre cet appareil en marche ni
2,4 GHz, par exemple un périphérique
d'utiliser les fonctions BLUETOOTH et de
Wi-Fi, un téléphone sans fil ou un four à
micro-ondes, est utilisé à proximité de
réduction de bruits.
Si vous n'utilisez pas l'appareil pendant
cet appareil.
une période prolongée, la batterie
Comme les périphériques BLUETOOTH et
rechargeable risque de ne pas fournir une
Wi-Fi (IEEE802.11b/g/n) utilisent la même
charge suffisante. La batterie pourra
fréquence (2,4 GHz), des interférences en
hyperfréquences peuvent se produire et
fournir une charge adéquate après
plusieurs chargements et déchargements.
entraîner des parasites, des pertes de
Si vous rangez l'appareil pendant une
niveau audio ou l'interruption des
période prolongée, chargez la batterie tous
communications si cet appareil est utilisé à
les six mois pour éviter un déchargement
proximité d'un périphérique Wi-Fi. En
pareil cas, prenez les mesures suivantes.
excessif.
Si la durée d'utilisation de l'appareil
– Utilisez cet appareil à une distance d'au
moins 10 m (30 pieds) du périphérique
devient très courte, vous devez remplacer
la batterie rechargeable par une nouvelle.
Wi-Fi.
Veuillez contacter votre détaillant Sony le
– Si cet appareil est utilisé à moins de 10 m
plus proche afin de remplacer la batterie.
(30 pieds) d'un périphérique Wi-Fi,
éteignez le périphérique Wi-Fi.
Remarque sur l'électricité statique
– Installez cet appareil et le périphérique
L'électricité statique qui s'accumule dans le
BLUETOOTH aussi près que possible l'un
corps peut causer de légers picotements
de l'autre.
dans les oreilles. Pour réduire cet effet,
portez des vêtements fabriqués en
matières naturelles.
Publicidad
