Getting Started With Your Presidium Multi-Tester - PRESIDIUM Multi Tester III Manual Del Usuario

1. GETTING STARTED with your Presidium Multi Tester III
Powering up your Presidium Multi Tester III
This tester can be powered by either the use of an AC
adaptor (optional item sold separately) or through the use
of batteries. If AC adaptor is used, connect one end of
the AC adaptor to the tester (Fig. 1.1). and the other end
directly into an electrical outlet. Please ensure that only
the adaptor supplied by Presidium is used.
Fig. 1.1
If batteries are used (3 x AAA batteries), take note of the
positive (+) and negative (-) directions of batteries when
inserting the batteries into the tester (Fig. 1.2). The use
of alkaline batteries is preferred, as it should generally
give approximately two and a half hours of continuous
operation, while the use of ordinary batteries will give a
shorter working life.
Fig. 1.2
10