Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. LaMotte Manuales
  4. Equipos de Laboratorio
  5. ColorQ Copper 7
  6. Guia de inicio rapido

LaMotte ColorQ Copper 7 Guia De Inicio Rapido

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
Color
!
Insert tubes into ColorQ with line and arrow facing forward.
!
s
"
" = Shade meter from bright sunlight. Press/Hold button to turn off.
!
If unit should auto-off during testing rinse and fill one tube to Blank and return
to testing.
!
Brush and rinse all tubes promptly after use.
!
Allow tubes to dry before returning to case.
!
Replace reagent caps securely. Use only LaMotte replacement reagents.
!
bAt = Battery is low.
!
Er7
"
" = Tube is misaligned, scratched, stained, or light chamber is stained.
See User Guide for more information.
!
Introduire le ColorQ droit.
!
s
"
" = Maintenir l'appareil l'ombre. Appuyer le bouton off pour l'eteindre.
!
Si l'appareil s'éteint automatiquement refaire un blanc et reprendre l'analyse.
!
Essuyer et nettoyer tous les tubes correctement après l'usage.
!
Permettre que les tubes se sechent bien avant de les réutiliser.
!
Ferrer correctement les reactifs.
!
bAt = Batterie basse.
!
Insertar el tubo en el ColorQ recto.
!
s
"
" = apartar el aparato de los rayos
del sol. Presionar/mantener el botón para
apagar.
!
Si el aparato se auto-apaga durante el
test, llenar un tubo para el Blanco y volver
al análisis.
!
Enjuagar y limpiar todos los tubos
adecuadamente después del uso.
!
Permitir que los tubos se sequen antes de
volver a usarlos.
!
Cerrar correctamente los reactivos.
!
bAt = Bateria baja.
NOTE: Optional Reagents sold separately.
WARNING! This set contains chemicals that may be harmful
if misused. Read cautions on individual containers carefully.
Not to be used by children except under adult supervision.
Copper 7
Q
PO Box 329 • Chestertown • Maryland • 21620 • USA
800-344-3100 • 410-778-3100 • 410-778-6394
www.lamotte.com
09/17 • 62068
TABLET VERSION
Order Code 2068

Publicidad

loading

Manuales relacionados para LaMotte ColorQ Copper 7

Resumen de contenidos para LaMotte ColorQ Copper 7

  • Página 1 Brush and rinse all tubes promptly after use. Allow tubes to dry before returning to case. Replace reagent caps securely. Use only LaMotte replacement reagents. bAt = Battery is low. ” ” = Tube is misaligned, scratched, stained, or light chamber is stained.
  • Página 2 Quitar el tubo. * Reagent is a potential health hazard. Read MSDS at www.lamotte.com. * Los reactivos son peligrosos para la salud. Leer MSDS en www.lamotte.com. * Les reactifs sont dangereux pour la santé. Reactivos son peligrosos. Lire MSDS en www.lamotte.com.
  • Página 3 FREE CHLORINE/BROMINE ColorQ Range: 0-10 ppm free chlorine, 0-22 ppm bromine DPD 1 - Code 6903A-J Color 1. Add one DPD1 Tablet to same tube. 2. Cap. Shake for TEN seconds. Invert slowly 5 times. Insert tube into ColorQ. 3. Press button to read “FCL” Free Chlorine. NOTE: To read as Bromine, press button past “FCL”...
  • Página 4 TOTAL CHLORINE ColorQ Range: 0-10 ppm total chlorine. DPD 3 - Code 6197A-J Color Color 1. Remove cap from reacted FCL (Free Chlorine) tube. 2. Add one DPD 3 Tablet. Shake for TEN seconds. Invert slowly 5 times. 3. Insert tube into ColorQ. 4.
  • Página 5 ColorQ Range: 6.5-8.5 pH - Code 3880A-J Color 1. Fill a clean tube to the 5mL line with water sample. 2. Add 1 Tablet. Crush with tablet crusher. 3. Cap. Invert 3 times to mix. Insert tube into ColorQ. 4. Press button to read “PH” pH. Remove tube. Remplissez jusqu'à...
  • Página 6 ALKALINITY ColorQ Range: 0-250 ppm ALK - Code 3882A-J Color 1. Press button to go to “ALY” Total Alkalinity. 2. Fill a clean tube to the 5mL line with water sample. 3. Add 1 Tablet. Crush with tablet crusher. 4. Cap. Invert 10 times to mix. Insert tube into ColorQ. 5.
  • Página 7 CALCIUM HARDNESS ColorQ Range: 0-400 ppm * CaHard - Code 3883A-J Color 1. Press button to go to “CH” Calcium Hardness. 2. Fill a clean tube to the 5mL line with water sample. 3. Add 1 CaHard Tablet. Crush THOROUGHLY with tablet crusher. 4.
  • Página 8 CYANURIC ACID ColorQ Range: 0-125 ppm *CYA - Code 6996A-H NOTE: Optional Reagents Sold Separately. Color 1. Press button to go to “CYA” Cyanuric Acid (to skip test press button again). 2. Fill a clean tube to the 5mL line with water sample.
  • Página 9 COPPER ColorQ Range: 0-4 ppm *Copper - Code 3808A-J Color 1. Press button to go to “COP” Copper. 2. Fill a clean tube to the 5mL line with water sample. 3. Add 1 COP BCA tablet. Crush with tablet crusher. Cap. 4.
  • Página 10 IRON ColorQ Range: 0-3 ppm *Ir - Code 3725A-H NOTE: Optional Reagents Sold Separately. Color 1. Press button to go to “Ir” Iron (to skip test press button again). 2. Fill a clean tube to the 5 mL line with water sample. 3.

  • Página 11: La Solution De Biguanuros (Phmb)

    BUGUANIDE ColorQ Range: 0-70 ppm Biguanide (PHMB) Test Solution - Code 3919-H NOTE: Optional Reagents Sold Separately. Color 1. Press button to go to “ bi 9 ” Biguanide (to skip test press button again). 2. Fill a clean tube to the 5 mL line with water sample. 3.
  • Página 12 BIGUANIDE SHOCK ColorQ Range: 0-160 ppm b S h Biguanide Shock - Code 6930A-H NOTE: Optional Reagents Sold Separately. Color 1. Press button to go to “b S h” Biguanide Shock (to skip test press button again). 2. Fill a clean tube to the 5 mL line with water sample. 3.