TMC Aquarium V2 Skim 120 Nano Skimmer Manual De Instrucciones página 3

2
V
Skim 120
INSTRUCTIONS FOR INSTALLATION AND USE
Important Safety Information - Please Read Carefully
- Always isolate the pump from the mains electricity before installing or
carrying out any maintenance to the skimmer.
- Power to the pump must be supplied through a Residual Current Device (RCD) with
a rated residual operating current not exceeding 30mA.
- The pump is designed to run completely submerged in water - do not run the pump dry.
- To ensure the pump continues to maintain a steady water flow, it must be cleaned
regularly to ensure it does not become clogged with debris or detritus.
- Pump rating: 220-240V, 50Hz unless marked otherwise.
- Do not operate any appliance if it has a damaged cord or plug, if it is malfunctioning,
or if it has been dropped or damaged in any way.
- This unit is designed to be used indoors and is not suitable for any outdoor
applications.
- Ensure the skimmer is securely installed before operating.
- Always leave a drip-loop in the pump cable to prevent water running down
the cable and reaching the power source (see picture below).
- Dispose of this unit responsibly. Check with your local authority for disposal
information.
Aquarium
Nano Skimmer
Typical Installation
1
Drip-loop