Technical Specifications - Urmet 1071/55 Guia De Inicio Rapido

ENGLISH
The device is used to connect a Modo monitor
1717/12H in a 2Voice system to IPerBus.
The following functions will be available on the
1717/12H motor using this device:
• activating up to eight scenarios (input, output or
other) in simple, user-friendly manner
• receiving up to six different alarm signals and
sending them to the concierge switchboard
• viewing instant, progressive consumption of
several meters (up to four) connected to one or
more 1071/7 modules.
The device must be installed in a flush-mounting
box (503 or diameter 60) behind the monitor or in a
junction box. The minimum distance between
1071/55 and the monitor is 15 metres.
When the monitor is connected to the 1071/55
home automation interface the call repeat
function will not be available, but the floor call
function may still be used.
DS1071-023A

TECHNICAL SPECIFICATIONS

Electric characteristics
• Powered by Bus:
• Bus terminal configurable by means
of jumper:
Logic characteristics
• Configurable with IPerSet software, via USB (see
1071/56)
• 254 possible logical addresses
Mechanical characteristics
• Mechanical structure suitable for installation in
round boxes Ø 60 mm, in 503 boxes
• TERM bus terminal
• Dimensions: 40 x 30 x 14 mm
[1.57 x 1.18 x 0.55"]
• Dimensions of terminals boards:
2
- 1 mm stranded wire
2
- 1,5 mm unipolar wire [AWG15]
• Working temperature range: from -5 to +45 °C
• IP protection level:
• Compliant with:
0.5 CU
TERM
[AWG17]
IP40
EN 60669-2-1
EN 60669-1
3