Main Unit Sensor Searching; General Settings Mode; Navigating Through Main Menu; Changing Settings - Oregon Scientific AWS888N Instrucciones De Funcionamiento

MAIN UNIT SENSOR SEARCHING

Press and hold SEARCH for 2 seconds to manually
activate sensor searching. The search icon will blink
until the remote signal is found or the search period
times out.
Search for channel signal (shown in Temp-Hygro-
Pressure mode):
Searching
for Sensor
Search for RF clock signal (Shown in Clock-Alarm
mode). The selected sensor's channel will be shown
in the house display window:
Strong clock and Weak clock and
remote signal remote signal
If no signal is found, check remote unit batteries.
Sensor
No sensor
found found
No signal
NOTE The sensor search will automatically start
when the main unit is reset.

GENERAL SETTINGS MODE

All settings and display options for this product are
accessible from the MAIN MENU.

NAVIGATING THROUGH MAIN MENU

CHANGING SETTINGS

1. Press or
wish to change.
2. Press ENTER to select it.
3. Use the
change values.
4. Press ENTER confirm changes.
TIP: Pressing the
screen.
9
To access
MAIN MENU
from any
screen press
HOME.
Press
to highlight a
desired option
then press
ENTER to
activate it.
to highlight the option you
UP or DOWN buttons to
will return you to the previous
or