Main Unit - Oregon Scientific BAR898HG Manual De Usuario

MAINTENANCE
When handled properly, this unit is engineered to give you years
of satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
with water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with alcohol containing detergent,
abrasive or corrosive materials. Abrasive cleaning agents
may scratch the plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries,
or distorted parts.
4. Do not tamper with the unit's internal components. Doing so
will terminate the unit's warranty and may cause damage. The
unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may leak.
6. Read this instruction manual thoroughly before operating
the unit.
SPECIFICATIONS

Main unit

Indoor Temperature measurement
Proposed operating range
Temperature resolution
: -5.0°C to +50.0°C
(23.0°F to 122.0°F)
: 0.1°C (0.2°F)
Relative Humidity measurement
Measuring Range
Humidity Resolution
Remote unit
RF Transmission Frequency : 433 MHz
No. of Remote unit
RF Transmission Range
Data sensing cycle
Temperature measurement
Display range
Proposed operating range
Temperature resolution
Relative Humidity measurement
Measuring Range
Humidity Resolution
Barometric Pressure measurement
Pressure measuring range
Power
Main unit
13
: 25% RH to 95% RH at 25°C (77°F)
: 1% RH
: Up to 3 units
: Up to 100 meters
: around 40 seconds
: -20.0°C to +60.0°C
(-4.0°F to 140.0°F)
: -5.0°C to +60.0°C
(23.0°F to 140.0°F)
: 0.1°C (0.2°F)
: 25 to 95%RH at 25°C (77°F)
: 1% RH
: 795 to 1050mb / hPa
(23.48 to 31.01 inHg)
: uses four (4) UM-3 or "AA"
1.5V batteries