Instructions; Timing Function; Filter Reset - Ventus UV Manual De Usuario

ON/OFF
Turn the purifier on or off.
Open the purifier air quality detection sensor system to open, the operation panel digital tube frame flashes
about 30S, the air quality detection sensor system completes the test. The indoor air quality condition is
informed by the digital display of the operation panel and the air quality indicator "green, blue and red";
Intelligent mode
In this mode, the auto mode indicator lights up and the device automatically adjusts the wind speed based
on the air quality data detected by the sensor, which is suitable for most application scenarios.

Timing Function

When the purifier is working, press the button to select the required working time (1~8h). After the set time,
the purifier will automatically stop working.
Fan Adjustment
In this mode, you can select the purging speed by tapping the wind speed adjustment button.
1st gear: At this time, the purifying fan speed is small.
2nd gear: At this time, the purifying fan speed is medium, which is suitable for improving air quality.
3rd gear: At this time, the purifying fan speed is large, suitable for most polluted indoor conditions.
UV-C function
Touch the UV-C button to turn on the UV-C disinfection function, and the corresponding indicator on the
display panel lights up. The built-in 1 pcs UV-C lamp tube start to work, removing bacteria and viruses in
the filter and airflow, and touch the UV-C button again to close.

Filter reset

When the service life of the machine filter expires, the filter reset button flashes red, prompting to replace the
filter; after the filter is replaced, long press the button to turn off the red light to reset the filter life.
INSTRUCTIONS FOR USE
Digital Display
1-75
76-150
Over 150
Color
Green
Blue
Red
20
Air Quality
Very good
Good
Poor