Product Configuration And Parameters; Maintaining - Ventus UV Manual De Usuario

PRODUCT CONFIGURATION AND PARAMETERS

Rated voltage:
Rated power:
Material quality:
Overall size:
Always turn off the power and turn off the power to the machine by pressing the button (6) before performing
any maintenance operations. You can clean the product body with a slightly damp cloth.
IMPORTANT: Do not use any abrasive material to avoid damaging the surface of the
device.
Consumable replacement
To purchase consumables, you can contact via
e-mail: info@evsa.net
The filter replacement data has been calculated based on using the purifier for 8 hours a day at low speed.
The recommended filter change frequency will vary depending on the duration of use and the operating
environment. The corresponding indicator will light when the filter needs to be changed.
Lamp replacement data is approximate, will vary depending on duration of use and operating environment.
It should be replaced when it stops emitting UV light.
Attention! When your purifier motor stops working, check if you need to replace the filter.
•
The filter indicator light is on, indicating that the activated carbon and HEPA composite filter need to be
replaced;
Note:
* Activated carbon and HEPA composite filters cannot be cleaned or reused. Do not wash them.
* To replace the filter in sequence, please refer to "Before Use". "First-time use of the filter to remove the filter
and replace the filter after the filter has expired".
Warm tips
•
If you are allergic or have asthma, avoid contact with used filters.
•
Wear gloves when replacing the filter, or wash your hands after replacement.
•
Put the used filter into a sealed bag and throw it away to avoid the spread of contaminants.
220V - 50Hz
55W
ABS
295*295*607mm
MAINTENANCE
Consumable
Activated carbon
and HEAP
composite filter
UV Lamp
21
CADR(Particulates):
Application area:
Product Weight:
Class
Operating
Replace
Replace
300 m³/h
120 m²
5.2 kg
II
Frequency
Every 12 months
Approx. every 4000h