monzana DBDL006 Instrucciones página 22

Retainer
No-Mar-Tip
Maintenance
any maintenance or checks.
Check all parts for signs of wear. If any problems
are detected, do not use the product. Always
replace all parts with original replacements
according to the manufacturer's guidelines.
If the product is not properly cared for and
maintained, it can become unsafe and can also
become damaged. This can lead to dangerous
Regular maintenance on the product helps to
make the product safe and will also increase its
lifespan.
Removing blockages
Remove a jammed nail using the following
procedure:
1. Disconnect the hose.
2. Remove the nails from the magazine otherwise
all the nails will be ejected from the front.
3. Remove all the small screws (A) and take the
4. Carefully remove the jammed nail with pliers
or a screwdriver, without bending or damaging
the driver plate.
5. Replace the front plate (B) on the front (C) and
6. Connect the compressed air hose to the device
again.
7. Load the nails
Front
plate (B)
Screw (A)
Cleaning
• When cleaning, please make sure that no
parts of the device are disassembled because
components could be lost inside or parts that
contribute to the safety of the appliance could
be reassembled incorrectly.
• Vents, the contact element and the trigger
must be kept clean and free of debris. Clean the
device regularly with compressed air.
• Clean the magazine, removing any metal and
wood chips that may have accumulated in the
magazine. Clean the magazine regularly with
compressed air.
• Do not use cleaners such as gasoline, carbon
tetrachloride, ammonia as these can damage
Storage
• Store the device in a safe place and out of reach
of children and unauthorised people.
• When not in use, the device should be
disconnected from the compressed air supply
and stored in a warm, dry place in its carrying
case. If the device is stored for a long period of
of oil to prevent rust. Store the unit in a cool
environment.
www. De u ba X XL . de
Front (C)
22