Lanaform TENSIOS1 Manual Del Usuario página 30

3. Memory Recall
- This monitor can store up to 60 sets of memory. To recall the memory, please
press "M" button first. Then, the average measurement result will be shown on
the LCD first.
- After the average reading is shown on the display, you can press "M" to track
historical records from No.1 to No.60.
- Press Time Set Button "
4. Memory Deletion
- To clear all the memory records, please press "M" and hold it until the screen
shows Clr.
- This function is only operated under power off mode.
MAINTAENANCE AND CLEANING
1. Clean the device carefully only with a slightly moistened cloth or mild deter-
gent.
2. Do not immerse the device in water. It may cause damage if water enters.
3. Do not use any gas, strong detergent, or solvents to clean the device, inclu-
ding the arm cuff.
" to recall historical records backward.
• 30 •