Facial Cleansing And Massage; Ion Revitalizing; Light Treatment - Oregon Scientific Ionic Cleansing & Nourishing Pro Manual Del Usuario

FACIAL CLEANSING AND MASSAGE

1. After face wash, attach the cotton puff onto the massage
head, then apply toner onto your face.
2. Press button to turn on the cleansing mode, the green
LED indicator is on. Grip the silver plating on the both
side of the main unit.
For sensitive skin, press twice for the intermittent
NOTE
mode.
3. Massage your face gently with the metal head in
direction as figure shown for 5 minutes.
NOTE The cleansing mode turns off automatically after
5 minutes.
TIP For a better result, massage your cheeks, T-zone
and chin for 20 seconds with purified water or toner after
basic cleansing.

ION REVITALIZING

1. Apply your usual moisturizer onto your face evenly.
Press the button, the blue LED indicator is on. Grip
the silver plating on the both side of the main unit.
For sensitive skin, press
NOTE
mode.
2. Massage your face gently with the metal head in circular
direction as figure shown for 5 minutes.
The ion revitalizing mode turns off automatically
NOTE
after 5 minutes.
TIP Massage your face with toner/lotion/essence/essential
oil for 5 minutes for better adsorption efficiency after treatment.

LIGHT TREATMENT

1. Press to turn on the 590 nm light treatment mode.
The red LED indicator turns on.
For sensitive skin, press
NOTE
mode.
2. Hold the main unit in 10 mm away from your face, the
move the main unit back and forth for 10 minutes.
NOTE
• It is recommended to have a light treatment 2-3 times
a week, for a better result, use this before sleep.
6
twice for the intermittent
twice for the intermittent