8. Opening and Closing Mount Arms
To Open
Open mount arms by pulling down on the orange cords while an assistant pulls the bottom of the display up and
away from the wall.
Note: The kickstand will automatically engage. Make sure it is in the down position before letting go of the display.
Important: Open position is for service access only. The bracket must be closed during
normal use.
To Close
Pull display away from the wall slightly to release kickstand while an assistant pulls down on black cords. Once
black cords are pulled, kickstand will disengage.
Note: Support the display until the mount arms are engaged in the closed position.
13-11-103-9332E9.indb 11
2
1
11
PULL
DOWN
PULL
DOWN
4/17/2014 2:12:12 PM