Indesit MWI 222.1 X Manual De Instrucciones página 133

B. Prepare the cabinet.
1. Read the instruction on the BOTTOM CABINET TEMPLATE, put the template on the bottom plane of cabinet.
2. Make marks on the bottom plane of cabinet according to marks "a" of the template.
BOTTOM CABINET TEMPLATE
NOTE: IT IS VERY IMPORTANT
TO READ AND FOLLOW THE
DIRECTIONS IN THE INSTALLATION
INSTRUCTION BEFORE
INSTALLATION.
This template is used to locate the
cabinet bottom bracket holes "a".
1. Check if your cabinet has a
smooth, flat bottom and right size,
and tape the template onto the bottom
plane of cabinet.
- Make sure the CENTERLINE
of the template is in the middle
of the cabinet
- Make sure the FRONT EDGE OF
template is even with the cabinet
front edge.
2. Make mark on the bottom plane
of cabinet according to the hole "a"
of the template.
- Do not drill holes in the
bottom cabinet.
3. After make all marks (10 marks)
according to the instructions, remove
the bottom cabinet template.
4. After marking hole "a", continue
to install according to the installation
instructions.
CENTER LINE
FRONT EDGE
SCREW A
BOTTOM BRACKETS
FRONT EDGE
FRONT EDGE
GB
133