Use In The Water; Operation; Backlight And Keypad Lock; Display Modes - Oregon Scientific PE603 Manual De Usuario

1. Using a small Phillips screwdriver to remove battery
compartment lid. Once opened, please keep the
screws in a safe place to avoid losing them.
2. Remove the old batteries and insert the new matching
the polarities.
3. Replace the lid by screwing it back into place using
a Phillips screwdriver.

USE IN THE WATER

The PE603 is water-resistant up to 50 meters (164
feet).
RAIN SHOWERING
SPLASHES (WARM/
ETC COOL
WATER
ONLY)
50M /
OK
OK
164 FEET
NOTE Set the unit before exposing it to excessive water.
Pressing the keys while in the water or during heavy
rainstorms may cause water to enter the unit.

OPERATION

BACKLIGHT AND KEYPAD LOCK

Press - to turn backlight ON for 5 seconds.
LIGHT SHALLOW SNORKELING/
DEEP
SWIMMING/ DIVING/
WATER
SHALLOW SURFING/
DIVING
WATER WATER
SPORTS
NO
OK
OK
NOTE The backlight function will not operate while the
low battery icon is displayed and it will return to normal
once batteries have been replaced.
To toggle keypad lock ON / OFF:
Press and hold
locked.

DISPLAY MODES

Press DISP to switch between Pedometer with Time
display and Calories burned with Date display.
NOTE
Calories Burned and date will appear for up to
5 seconds at a time before reverting back to Time and
Pedometer display.

SETTING MODE

Press SET to enter the setting mode.
Press SET continuously to scroll through setting modes.
The setting modes are as follows:
4
- . indicates keypad is