Snooze Function - Denver CRP-515 Instrucciones De Uso

Action (during data adjustment):
- Press <</Tune - (3) button to adjust data backward.
- Press >>/Tune + (5) button to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto
forward.
- Use AL1/AL2 set button to confirm each setting.
ALARM
Beep alarm or radio alarm will ring for 30 minutes if no key is
pressed, then it will stop automatically and wait for same alarm time
on next day.

SNOOZE FUNCTION

- When Alarm rings, press Snooze button (4) to suspend the
alarm & to activate the snooze function, Beep or Radio alarm will
stop. 9 minutes later the alarm will ring again. Press SNOOZE
key again, alarm will be suspended again, another 9 minutes
later the alarm will ring again and so on until the next alarm
rings.
Note: The interval time of the Snooze function is 9 minutes.
- If you want to disable the SNOOZE function and stop alarm
completely, press Radio ON/OFF button (7). If you don't press
any button, the alarm will ring during 30 minutes & stop
automatically.
- Icon of AL1 and AL2 will blink as long as Snooze function is still
operating. Once Snooze is turned off icon of AL1/AL2 stop
blinking and lights on the display.
DISPLAY LIGHT ON/OFF FUNCTION
- Press MEM. Set/M+/display light auto on-off /NAP button (6) for
3 seconds, the LED display
display will turn off after 15 seconds automatically.
Press any button to maintain the LED display for 15 seconds.
- Press MEM. Set/M+/display light auto on-off /NAP (6) button for
3 seconds, the LED display
function.
AUTO CHANGE DISPLAY CONTENT
In radio off mode, press the VOLUME UP/DISPLAY AUTO
CHANGE ON/OFF (2) button and keep depressed over 2 seconds
to enter time auto change display mode ("ON" will appear on the
display).
DENVER CRP-515.indd 4
indicator will light on, the LED
indicator will light off to cancel this
ENG-3
15 12 3 2:59