Publicidad
Idiomas disponibles
Idiomas disponibles
English
Congratulations on buying an approved quality product meeting international
standards, made by Thitronik. GBA-I reliably alerts you in case of narcotic gas at-
tacks or gas leaks. The dynamic temprature compensation and the continuous
sensor self test ensure a reliable operation even under different climatic condi-
tions.
Mounting locations:
Choose a location underneath the sleeping-places. Avoid vicinity to heater
outlets and lead-acid-batteries. GBA-I is not to be used in bathrooms.
Minimum seperations:
Heater outlets
Lead-acid-batteries
Installation:
Mount GBA-I to a wall or closet using the drilling template (Scetch 2) and the
provided screws. !!!Attention!!! screw-in-depth (scetch 1)!!! Plug the connection
cable in the socket until it locks audible. You can lay the cable either through
the wall or the small predetermined breaking point underneath the
pushbutton (A).
Interconnections:
Connect the cable to an appropriate powersupply (12/24VDC)
brown
+12/24V
white
Gnd (ground)
green
not used
To operate GBA I at 230VAC the optional wall plug transformer
(order no. THG-2-00015) is to be used instead of the connection cable.
Operating:
-switch on GBA I with pushbutton (A).
-The operating indicator (B) switches from yellow to green after a few seconds.
(at first activation up to 20 minutes)
-After appx. 4 min. heating phase indicated by the green indicator GBA I
will be ready to detect gases. Indicator will flash green.
Technical specifications:
Power supply:
Current consumption:
Weight:
Detection:
Delivery scope:
GBA-I, power cable, alarm sticker, manual, mounting materials
Warranty: 24 month from date of purchase
1,5 m
1,0 m
12/24VDC
appx. 70mA
appx. 60g
from 50ppm narcotic gas, Propane, Butane
Publicidad
