Product Use - Nuna arra Manual Del Usuario

Product Use

Installation Concerns
This enhanced child restraint is suitable for vehicle
seats with i-Size ISOFIX anchor points with the Base.
(1)
DO NOT use the rearward facing enhanced child
restraint systems in seating positions where there is
an active frontal airbag installed. (2) Death or serious
injury may occur. Please reference vehicle owner's
manual for more information.
DO NOT install this enhanced child restraint on vehicle
seats that face sideways or rearward with respect to
the moving direction of the vehicle.
Please refer to your vehicle owner's manual for
recommended or suggested installation positions. (3)
It is recommended to install this enhanced child
restraint on the rear vehicle seat. (4)
DO NOT install this enhanced child restraint on
vehicle seats movable during installation.
Side Impact Shield
Ensure the side impact shield is locked in the open
position for maximum side impact safety.
IMPORTANT: Please note that unfolding the side
impact shield does NOT mean that the child is
already restrained tight enough.
13 ARRA instruction
1
The side impact shield can be manually opened
as shown on (5).
2
The side impact shield opposite the vehicle
door can be closed to allow more seating space,
if needed. (6) The side closest to the vehicle
exterior should always be in the open position.
Handle Adjustment
1
The handle of the enhanced child restraint can be
adjusted to 2 positions. (7)
Position for car, hand or stroller transportation.
(7)-1
Baby chair position. (7)-2
2
To adjust the handle, squeeze handle adjustment
buttons on both sides to release it (8)-1, and then
rotate the handle until it clicks into any of the 2
positions. (8)-2
Installation with Base
1
Fit the ISOFIX guides with the ISOFIX anchor
points. (9) The ISOFIX guides can protect the
surface of the vehicle seat from being torn. They
can also guide the ISOFIX connectors.
2
Unfold the load leg from storage compartment.
(10)
ARRA instruction 14